How To Install Aux In Car

How do I put an AUX input in my car?

You lot can apply an RCA-aux adapter to install aux input in the auto stereo if it has RCA ports. Otherwise, you can mount the aux input jack to the CD changer of the stereo past soldering its wires to the changer plug's footing, left, and right pins.

Table of Contents

• How do I put an AUX input in my automobile?
• What You lot Volition Demand to Follow This Tutorial
• Employ an RCA-aux cable/adapter
• Install an unabridged aux input jack
  • Identify the CD Changer Pinout of the Stereo
  • Solder the Aux Input Jack
  • Mountain the Jack on the Dash
  • Test
• Conclusion

Aux input has go a staple characteristic of mod machine stereo systems. Withal, mill-fitted stereos in old vehicles don't have one, and hence, yous tin can't play your jail cell telephone or mp3 player playlist on those sound systems.

If you don't want to become rid of your classic stereo but too want to play hundreds of tracks from your portable device on your auto speakers without burning CDs, you lot need to know how to install an aux cord in a car stereo.

Hither, we will guide y'all on how to add an auxiliary input to your motorcar's stereo without going to an audio shop.

What You Will Need to Follow This Tutorial

• RCA-aux adapter/cable
• Aux input jack
• Soldering iron
• Soldering wire
• Drill auto

Depending on the stereo installed in your auto, you have 2 options to install aux input.

• Use an RCA-aux cable/adapter
• Install an entire aux input jack

Use an RCA-aux cable/adapter

If your stereo has RCA inputs (bank check its back), the installation of aux input gets pretty simple. All you lot need is a readymade adapter cable. Plug its ii RCA input jacks in the stereo, and utilise its 3.5mm pivot every bit your aux input.

Still, if there are no RCA inputs in the stereo, the installation process becomes a bit complex. Now, you have to solder an aux input jack into the stereo system. Permit'southward take a look at the steps you will need to follow.

Install an entire aux input jack

Place the CD Changer Pinout of the Stereo

After removing the stereo from the dash, you accept to locate its CD changer and its pinout. Here, a bit of enquiry is needed. You have to refer to the transmission of your car stereo. You tin also run online searches to observe the layout and the exact pivot location on the CD changer used in your stereo system. Your goal is to place the basis, left, and right aqueduct pins on the pinout.

Solder the Aux Input Jack

A standard aux input jack has a 3.5mm male jack on one stop and three different color wires on the other terminate. You have to solder those three wires to the three pins of the CD changer after identifying them in the earlier stride. The black wire volition be soldered to the ground signal ground pivot, the crimson one will be soldered to the right channel, and the white or xanthous wire volition be soldered to the left channel.

If yous are using the soldering iron for the kickoff time, have some warm-up and a practice session beforehand. Take a elementary plastic board, mark pocket-sized dots on information technology with a pen/marker, and indicate those dots with the soldering wire through the solder. Later on making the accurate dots, proceed to solder the aux wires to the CD changer plug.

Mount the Jack on the Dash

After successful mounting of the wires with the CD changer plug, y'all have to ready the male jack of the aux input on the dash in a way where you can hands use it to plug in your devices. You might accept to drill a slot in the dash to mount the jack. Pick the spot for the drilling carefully, and make sure there is nothing behind the spot where you volition drill.

Exam

Before putting the head unit of measurement back and reinstalling the dash, y'all should examination the aux input. If the stereo starts playing audio input from your phone/mp3 histrion, fit the head unit in its docking crenel and pack the dash components. Otherwise, troubleshoot the problem, and go a car audio skilful on lath.

Decision

We hope that this "how to install aux input in a car stereo guide" helps you expand your onetime motorcar stereo's functionality. If you like this article, don't forget to share it with swain car owners driving the old models with stock stereos. If you lot have any queries, shoot them away in our comment section.

Last update on 2022-04-06 / Chapter links / *Image Disclaimer: We utilise images/data from Amazon Product Advertising API solely on products that link to Amazon. On products with the "Cost at Crutchfield" button, we utilise images/data from Crutchfield.com as per the partnership deal.

Source: https://99carstereo.com/how-to-install-aux-input-in-car-stereo/

Posted by: madrigalhiscon.blogspot.com

Share this post